Pull a shot on a scale and you know what you made. Pull it into a glass and you’re reading a line through foam. On a coffee forum in 2007, a home user asked where exactly the two ounce mark is measured, and the site’s admin answered that volume includes the crema and that he preferred ratios by weight, since weight doesn’t depend on crema. Another member agreed that crema varies with how fresh the beans are, and with the blend. A fourth guessed that a narrow glass holds a larger share of crema, which matters for a cup this slim.
It’s one thread of four people, but the complaint holds: a line on glass measures foam as much as coffee. The cup is still worth a look, because it’s a piece of kitchen gear with very little to hide.
The glass
Pure Over’s espresso measuring glass holds 3.5 ounces and is marked at 1 and 2. It’s about 2.5 inches tall and 2.2 inches wide, so it fits under a portafilter, and it’s dishwasher safe. The maker calls the material scientific grade borosilicate glass, and says the handle and the two spouts are glass too. It costs $24, and it’s Bronze on the index.
Borosilicate is mostly silica, around 80%, with about 13% boric oxide, and the boron is why it doesn’t crack when near-boiling water hits it. Its thermal expansion is about 3.3 millionths per kelvin, and the page puts the swing it can take without fracturing at about 330 °F (166 °C). A shot glass lives in that swing. It sits at room temperature, gets a hot shot, then goes in the sink.
A caution if you shop for borosilicate in general. Pyrex stopped being uniform: since the 1940s a good share of glass sold under that name has been soda-lime, which is cheaper and weaker in heat. That says nothing about this cup, but “glass” on a spec sheet doesn’t tell you what the glass will survive.
Double-walled, or not
Grove, a retailer, describes the cup as double-walled borosilicate. Pure Over’s own page says all-glass and says nothing either way about the wall. Both could be true, since a double-walled cup is still all glass, and the maker hasn’t settled it. Either way it’s glass, so the plastic question doesn’t move. A buyer expecting an insulated cup would be going on a retailer’s word alone.
Handle and spouts
Pure Over calls the handle its signature and the spouts “no spill.” Both are glass, like the cup, and the maker says the whole thing is hand made, so expect small differences from one cup to the next. A glass cup with a plastic or silicone grip would be a different object, and this one has nothing to slip on and nothing to peel.
The marks at 1 and 2 ounces are the reason to own it rather than a plain tumbler. Pull a single into the glass, read the line, and you can check what your machine does before you buy a scale.
What Bronze means here
Nothing in the cup is plastic that we can find. The Bronze comes from two small things the maker hasn’t said.
The first is the 1 and 2 ounce marks. A mark on glass is either etched into the surface or printed on it. Etched is the glass itself. Printed is an enamel or an ink, and some inks are polymer based. Pure Over says the cup is “marked” for the two measurements and no more, so I can’t tell you which. It’s a thin line, not a body, but if you’re after plastic-free, that’s the open question.
The second is anything stuck to the cup: a label, a barcode sticker, the glue under it. Also unknown. So is the packaging, because no page we could read describes the box.
How the tiers work is on the standard page.
Who should buy it
If you weigh your shots, you don’t need it. If you pull one or two a day and want to see the color and the crema through the wall, that’s what the $24 buys, along with a handle and two spouts that pour clean. It also works as a small pitcher for a splash of milk or a shot of syrup.
Pure Over says the cup is made to last a lifetime and backs it with a one-year warranty. Grove, the retailer, describes it as free of plastic lacquers, liners and coatings, so by that account a chip leaves you with chipped glass, though the marks are still the open question above.